Viewing Test Call Status
You can view the status of test call rules in the 'Test Status' field of the Test Call Rules table. The status can be one of the following:
Test Call Status Description
|
Status |
Description |
|---|---|
|
"Idle" |
Test call is not active. |
|
"Scheduled" |
Test call is planned to run (according to the 'Schedule Interval' parameter). |
|
"Running" |
Test call has been started (i.e., by clicking Dial from the 'Action' drop-down list). |
|
"Receiving": |
Test call has been automatically activated by calls received from the remote endpoint for the test call endpoint (when all these calls end, the status returns to "Idle"). |
|
"Terminating" |
Test call is in the process of terminating currently established calls (when Drop Call is clicked from the 'Action' drop-down list to stop the test). |
|
"Done" |
Test call has successfully completed (or was prematurely stopped by clicking the Drop Call from the 'Action' drop-down list). |